How to install Futures Fins

Futures Fins are a full-based fin system that is locked in with a single grub screw. They are super easy to install.

---

How to install Futures Fins

When you look at the fin, you will notice a small tab at the rear of the fin. This is part of the design that helps to lock the fin in place.

You install it by sliding the fin at an angle to the rear of the box, so the rear of the fin  engages with the tab inside the box. Then push down until the front of the fin sits flush with the board.

Now use the fin key provided with the fins to tighten the grub screw. Turn the key clockwise until you feel gentle resistance.

Don't overtighten as you may strip the thread on the box. Finger tight is good enough.

And that's it.